Shimano Steps EC-E6000 User Manual

Shimano Steps EC-E6000

36 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

UM-7GP0A-003

Special battery and parts

user's manual

SHIMANO Total Electric Power System

Table of Contents

Other manuals for Shimano Steps EC-E6000

Original Instructions69 pages

Dealer's Manual57 pages

Questions and Answers:

J
Jennifer BowersAug 20, 2025
What to do if my Shimano Steps Battery Charger cannot charge?
- N
  Nicholas CamachoAug 20, 2025
  If your Shimano Steps Battery Charger is not charging, here are a few things to check: * Make sure the power plug of the battery charger is securely connected. Remove and reconnect it, and then try charging again. * Ensure the charging plug of the battery charger is securely inserted into the battery. Remove and reconnect it, and then try charging again. * Verify that the charging adapter and charging plug, or the charging adapter and battery charging port, are securely connected. * Check the connection terminals of the battery charger, charging adapter, or battery for dirt. If they are dirty, clean them with a clean rag or cotton bud dampened with ethanol, and then try charging again.
C
Christina RichAug 22, 2025
What does it mean if my Shimano Steps Battery Charger repeatedly flashes 3 times, indicating the temperature exceeds the operating range?
- J
  Julia CareyAug 22, 2025
  If the temperature is higher than the temperature at which discharging is possible, leave the Shimano Steps battery in a cool location with no direct sunlight until the internal temperature of the battery has decreased sufficiently. If the temperature is lower than the temperature at which discharging is possible, leave the battery indoors until the internal temperature has increased to an appropriate temperature.
S
Steve ZimmermanAug 25, 2025
Why does my Shimano Steps Camera Accessories battery drain so fast?
- C
  cgreeneAug 25, 2025
  If the Shimano Steps Camera Accessories battery depletes quickly, it could be that the battery has reached the end of its life. In this case, replace the battery with a new one. Alternatively, the battery's temperature might be outside of its operating range. Ensure you use the battery within its specified operating temperature range.
K
katiejonesAug 26, 2025
Why is the LED light off on my Shimano Steps Camera Accessories battery charger?
- R
  Ralph BrownAug 26, 2025
  If the Shimano Steps Camera Accessories battery charger LED does not light up, check the charging plug. Ensure no foreign material is attached to the connection area. Remove and reconnect the charging plug. Also, the LED turns off when the battery is fully charged; this is normal. Remove and reconnect the power plug of the battery charger, and then charge again.
S
Sydney FryeAug 27, 2025
What to do if the LED lights up briefly but my Shimano Steps Camera Accessories doesn't power on?
- N
  Nicolas AlexanderAug 27, 2025
  If you press the satellite power button and the LED lights up briefly but the power doesn't turn on for your Shimano Steps Camera Accessories, the (main) battery level might be too low. Try charging the (main) battery. Also, check that the (main) battery is securely connected.
K
kevin17Aug 29, 2025
How to fix Shimano Steps Camera Accessories when it cannot charge?
- C
  Cameron SantiagoAug 29, 2025
  If your Shimano Steps Camera Accessories cannot charge, first, check the power plug of the battery charger. Remove and reconnect it securely, and then try charging again. Next, verify the charging plug of the battery charger is securely inserted into the battery by removing and reconnecting it. Also, check that the charging adapter and charging plug or charging adapter and battery charging port are securely connected. Finally, inspect the connection terminals of the battery charger, charging adapter, or battery for dirt. Clean them with a waste cloth or cotton bud dampened with ethanol, and then try charging again.
M
Mr. Jason Nichols MDAug 31, 2025
Why doesn't the LED light up on my Shimano Steps Camera Accessories battery?
- T
  Tammy HawkinsAug 31, 2025
  If the Shimano Steps Camera Accessories battery LED does not light up, it may be because the battery level has been at 0% for a long time, or the battery hasn't been charged after purchase. Charge the battery.
A
Audrey HarrisSep 2, 2025
Why are my Shimano Steps Camera Accessories battery and charger getting so hot?
- D
  Deborah Hughes MDSep 2, 2025
  If the Shimano Steps Camera Accessories battery and battery charger become hot, the temperature of the battery and battery charger may exceed the operating temperature. Stop charging, and wait a while before starting to charge again.
R
Rebecca HowardSep 3, 2025
What to do if the key does not turn on my Shimano Steps Camera Accessories?
- P
  plewisSep 4, 2025
  If the key does not turn on your Shimano Steps Camera Accessories, foreign material such as dirt or dust may be stuck in the battery or battery mount. Turn the key while pushing the battery in the installation direction. If the battery is removed, follow the cleaning procedure to clean it.
R
Rachel TorresSep 5, 2025
Why won't my Shimano Steps Camera Accessories cycle computer start?
- R
  ramoslouisSep 5, 2025
  When charging with the battery installed to a bicycle, you cannot turn the cycle computer ON. Stop charging. The power automatically turns OFF if charging is started while the cycle computer is running.

Shimano Steps EC-E6000 Specifications

General

Brand	Shimano Steps
Model	EC-E6000
Category	Bicycle Accessories
Language	English

Related product manuals

Shimano Steps EC-E6002

Preview: Shimano Steps E5003

Shimano Steps E5003

Preview: Shimano Steps BT-E6000

Shimano Steps BT-E6000

Shimano Steps EW-SW100

Shimano Steps DU-E6002

Shimano Steps BT-E6010

Shimano Steps DU-E6001

Shimano Steps EW-CP100

Shimano Steps BT-E8016

Shimano Steps EW-EN100

Shimano Steps DU-E6012

Preview: Shimano Steps E8000 Series

Shimano Steps E8000 Series