63
Return to index page
(3) Use a hammer to strike TL-C7001.
• Use your hand to support the hub axle
while you strike it.
(4) The hub axle detaches.
TL-C7001
(2) Insert TL-C7001 aligned with the position of
the groove on the hub axle.
Hub axle
Disassembling the Internal Assembly
14. Remove the hub axle.
(1) Place the driver on the vise.
NOTICE
•
Make sure to place it so that the vise
is outside the washers inside.
Otherwise, the washers could detach
and you will be unable to reattach
them.
To Next Page
Loading...
