How to fix poor gear shifting on Shimano Bicycle Accessories?
If you're experiencing poor gear shifting with your Shimano Bicycle Accessories, start by checking the cable routing. Ensure there are no excessively tight curves in the cable. Shimano recommends a minimum curvature of R30 mm when using a genuine Shimano outer casing.
What to do if gear shifting is poor on Shimano INTER 5E Bicycle Accessories after cassette joint adjustment?
If you experience poor gear shifting with your Shimano Bicycle Accessories, and suspect it's due to adjusting the cassette joint while over-shifted, set the gear to 3rd from 5th. Then, readjust the cassette joint. To prevent over-shifting in the future, make adjustments to the shifting lever gradually and with minimal force.
General| Gears | 5 |
|---|---|
| Gear Ratio Range | 263% |
| Type | Internal Geared Hub |
| Over Locknut Distance (mm) | 135 mm |
| Brake Type | Disc Brake |
| Compatibility | E-Bike |
| Brake Compatibility | Disc Brake |
| Series | INTER 5E |
Explains automatic shifting features for E-BIKE riding.
Describes SHIMANO STEPS computer-assisted shifting system.
Details how to install the sprocket with and without chain guards.
Step-by-step guide for attaching the cassette joint to the hub.
Instructions for installing disc brake rotors, including CENTER LOCK and 5-screw types.
Covers mounting the hub to the frame, including non-turn washers.
Steps for connecting the inner cable and outer casing to the shifting lever.
Procedure for connecting the shifting cable to the cassette joint.
Guide on how to adjust the cassette joint for proper gear shifting.
Steps for disconnecting the shifting cable when removing the rear wheel.
Safety precautions for handling and using the internal assembly maintenance oil.
Lists common symptoms and solutions for coaster brake models.
Lists necessary tools and parts for disassembly and assembly procedures.
Detailed steps for replacing the internal assembly of the hub.
Instructions on how to install the cassette joint during disassembly.
Lists available cassette joint parts and specifications.
Details non-turn washers and their compatibility with different dropouts.
To Next Page