For splicing standard Single-mode
fiber (ITU-T G652). The MFD is 9 to
10 um at wavelength of 1310 nm.
It is the fastest splice mode.
9 Second splicing process without
considering limits.
There are many types of splice modes,
other than the ones stated above, can
be edited by users.
B. Select Splice Mode
Select an appropriate splice mode for type of fiber to be spliced.
Press Menu key at [READY], [PAUSE1], [PAUSE2] or [FINISH] state to open
[Splice Menu]. Select [Select Splice Mode] and the [Select Splice Mode] menu
is displayed.
In “Splice Mode Menu”, Move cursor by pressing button
to select “Splice Mode Menu” option, press button to enter, shown below:
To Next Page
Loading...