22(29)
R11
Cleaning filter screen
The materials start to
discharge to the hopper
F.07 0 secs. 0-99 secs.
R12 Waiting motor stop
F.12 3 secs. 0-99 secs.
N02
Waiting materials
completely discharge to
the hopper
F.20 10 secs.
5-99 secs.
N03
Waiting for material
circulating suction
F.09 0 secs.
0-9990 secs.
P
Waiting for suction
confirmation
4.5.2 Data Resetting
1) Turn off the machine plate power
2) Short circuit the two terminals of J2
3) Turn on the machine plate power
4) Remove the short circuit of J2’s two terminals after three secs.
5) Completed
Notes: All parameter settings will be reset to factory settings.
Please use this function carefully.
To Next Page
Loading...
