18(29)
4.2 Parameter Setting
In OFF mode，Press , and enter parameter setting.
Press or to select parameter，press enter setting.
Press or modify parameters，press Confirm revision.
E.g：set“Suction time setting” 15S
In OFF mode，Press and enter parameter setting.
Press or key to select the function code F.01, and press key
to enter.
Press or key to change it to parameter 15, and press key to
confirm after modification.
Code Status
Parameters
Preset
value
Range
F.01
Suction action time
Motor suction time when there’s a shortage of materials,
which is also the vacuum breaking valve’s working time.
Corresponding action: D
15 secs.
5-127
secs.
F.02
Shut-off action time
Start with the suction action at the same time, and set the
shut-off time. The time can’t be set exceed the suction action
time, and set it to 0 as not start.
0
0-127
secs.
F.03
Mixing proportion
Start at the same time with the suction action, and set the
mixing proportion.
Time calculation method: suction time * [F.03]%
Set 0 as not start.
0%
Not start
0-100%
To Next Page
Loading...
