29(29)
6.4 Maintenance Schedule
6.4.1 About the Machine
Model: SN: Manufacturing date:
Voltage: Ф V Frequency: Hz Total power: kW
6.4.2 Check after Installation
Check that the conveying hose is correctly connected.
Check that the conveying hose is tightly connected.
Check that the mounting base is tightly fixed.
Electrical Specifications
Voltage: V Hz
Fuse burnt current: One phase A Three-phase A
Check phase sequence of power supply
6.4.3 Daily Checking
Check main power switch
Check filter screen
Check motor performance
6.4.4 Weekly Checking
Check if there are damaged electrical wires
Check if there are loose connections of electrical components
Check if the screws of flange at material inlet are loose or not
6.4.5 Monthly Check
Check the spring lock on the hopper cover is loosed or not.
Check the non-return valve is deformed or not.
Check the performance of magnetic proximity switch/photoelectrical
sensor.
To Previous Page
Loading...
