23(43)
according to the assembly drawing). Large diameter water pipe shall be
used to connect cooling water during long distance transmission.
11) The water discharge valve must be installed at the lowest part of the chilled
water circulation system.
12) When the water source quality is poor, and the embient environment of the
cooling tower is harsh, the cooling water and chilled water loop must be
equipped with the filters and cleaned regularly.
13) The circulating circuit of chilled water shall be covered with insulation layer
to avoid the loss of cooling capacity and pipeline dripping.
The power wire connection of the water chiller must be done by the
professional electrician! The circuit of the water chiller is not allowed to be
modified without the consent of the company. If it is changed, our company
is not liable for the machine damage.
To Next Page
Loading...
