EasyManuals Logo

Shini SIC-A Series User Manual

Shini SIC-A Series
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38(43)
Attention!
All repair work should be done by qualified personnel only to avoid damage
to the machine or personnel injury.
In order to operate the machine rightly and safely, please caution the matter
follows:
1) Dont turn off the main power switch to stop the machine, except
emergency situation.
2) When the machine shuts down, first press down the main power switch of
the machine (the alarm light will be off); Then, check the cause of the fault
again, and dont start the machine forcibly before troubleshooting.
3) Please check periodicaly to prolong the machines service life and prevent
the safety accident.
4) The water used in the system must have water treatment, because the
high alkaline water will accelerate the corrosion of the copper pipe, and
reduce the service life of the heat exchanger. The PH value of water is in
the range of 7.0-8.5.
5) Keep the machine room dry, clean and well ventiliated.
6) The operation and service of the machine should be done by qualified
technician only (Please take notice that the disassembly and the inspection
of the machines are hazardous when the machines are running!)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shini SIC-A Series and is the answer not in the manual?

Shini SIC-A Series Specifications

General IconGeneral
BrandShini
ModelSIC-A Series
CategoryChiller
LanguageEnglish

Related product manuals