Shining 3D Transcan-C - Create;Split a Group

Shining 3D Transcan-C_User Manual_V1.4.2
33
Note: Delete only affects the data in the work. If the project is imported from other work, only the
created copy is deleted.
6.4. Create/Split A Group
Left mouse: Select data in the data list or on the scanned model.
Shift/Ctrl + Left mouse: Multi-select in the data list.
Create or split group.
Hide or display data.
After creating the group, all the selected data belong to it. Right-click the group or data to view
drop-down menu.
Note:
The data captured by turntable scan mode will belong to one group by default. The group can be
deleted or separated.
You could click the scan model to select data after hiding texture.