Shinko JCD-33A-R/M User Manual

2
1. Model
1.1 Model
JCD–33 A – R / M T5909-1 , W96 x H96 x D100mm
A1 A A1 output (Alarm type can be selected by keypad) *1
OUT1 R Limit control output (Relay contact: 1a)
Input M Multi-range *2
Control action T5909-1 High limit or low limit control action
100 to 240V AC (standard)
Supply voltage
1 24V AC/DC *3
A2 A2 output (Alarm type can be selected by keypad) *1
C5 Serial communication (RS-485)
TC Terminal cover
Option
BK Color: Black
*1: Alarm actions (9 types and No alarm action) and Energized/Deenergized can be selected by keypad.
*2: Thermocouple, RTD, DC current and DC voltage can be selected by keypad.
*3: Supply voltage 100 to 240V AC is standard. When ordering 24V AC/DC, enter “1” after the input code.
+
1.2 How to read the model label
Model labels are attached to the
case and the inner assembly.
(1) Model
(2) Option, supply voltage
(“1” is entered only for 24V AC/DC)
(3) Serial number (Only on inner assembly)
2. Name and functions of the sections
(Fig. 2-1)
(1) PV display
Indicates the PV (process variable) with a red LED.
Indicates setting item characters during the setting mode.
(2) SV display
Indicates the SV (desired value) with a green LED.
Indicates set (selected) value during the setting mode.
(3) RST (RESET) indicator
Lights when OUT1 NO contact (terminals between 5 and 6) is OFF with a green LED.
(4) EXCD (EXCEEDED) indicator
High limit action: The yellow LED lights when PV SV.
Low limit action: The yellow LED lights when PV SV.
(1)
(2)
(3)
(4)
(5)
(6)
(8)
(7)
(9)
(10) (11)
(12)
Relay contact output /Multi-range input
(1)
(2)
(Model label)
(e.g.)
(3)
JCD-33A-R/M T5909-1
No. 06KF05000
A2 outputA2
MULTI RANGE
1

Shinko JCD-33A-R/M Specifications

General

Brand	Shinko
Model	JCD-33A-R/M
Category	Controller
Language	English