Shinko JCD-33A-R/M User Manual

4
3.2 External dimensions (Scale: mm)
(Fig. 3.2-1)
3.3 Panel cutout (Scale: mm)
Lateral close mounting
n: Number of units mounted
Caution: If lateral close mounting is used for the controller,
IP66 specification (Dust-proof/Drip-proof) may be
compromised, and all warranties will be invalidated.
(Fig. 3.3-1)
Caution
As the case is made of resin, do not use excessive force while screwing in the
mounting bracket, or the case or screw type mounting bracket could be damaged.
The torque is approximately 0.12N•m.
3.4 Mounting
Mount the controller vertically to ensure it adheres to the Dust-proof/Drip-proof specification (IP66).
Mountable panel thickness: 1 to 15mm
(1) Insert the controller from the front side of the panel. (Fig.3.4-1)
(2) Attach the mounting brackets by the holes at the top and bottom of the case and secure the controller
in place with the screws. (Fig.3.4-2)
Gasket A
Screw type mounting bracket
Terminal cover (TC option)
96
91
106.2
11.5
98.5
104.5 (for TC option)
92
+ 0.8
0
130
92
+0.8
0
n x96-3
＋0.5
0
(Fig.3.4-1)
(Fig.3.4-2)

Shinko JCD-33A-R/M Specifications

General

Brand	Shinko
Model	JCD-33A-R/M
Category	Controller
Language	English