SHOWTEC Sunstrip LED V1 User Manual

16
Ordercode: 30752
Sunstrip LED
1. DMX Address
In this menu you can set the desired DMX starting address.
01) Press the ENTER button to open the menu. The display will show:
02) Press the UP/DOWN buttons to set the desired DMX address. The adjustment range is between 001–
512.
03) Press the ENTER button to confirm.
2. DMX Mode
In this menu you can set the desired DMX channel mode.
01) Press the UP/DOWN buttons to choose one of the 5 DMX channel modes:
● 1-channel mode
● 2-channel mode
● 3-channel mode
● 10-channel mode
● 20-channel mode
02) Press the ENTER button to confirm.
3. Pixel Invert
In this menu you can set the pixel direction.
01) Press the UP/DOWN buttons to select NORMAL or INVERT.
02) Press the ENTER button to confirm.

SHOWTEC Sunstrip LED V1 Specifications

General

Brand	SHOWTEC
Model	Sunstrip LED V1
Category	Light Fixture
Language	English