SHOWTEC Sunstrip LED V1 - Factory Reset; Firmware Version; Fixture Hours; Temperature

21
Ordercode: 30752
Sunstrip LED
03) Press the UP/DOWN buttons to change values.
04) Press the ENTER button to confirm.
8.3. Temperature
In this menu you can view the device’s temperature.
8.4. Fixture Hours
In this menu you can view the device’s total operation hours.
8.5. Firmware Version
In this menu you can view the currently installed software version.
8.6. Factory Reset
In this menu you can restore the default factory settings.
01) Press the UP/DOWN buttons to choose YES or NO.
02) Press the ENTER button to confirm.