Shure BLX1 User Manual

15 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

audio

ready

group

(A-Y)

channel

(0-9)

power

BLX88

audio

ready

group

(A-Y)

channel

(0-9)

audio

ready

group

(A-Y)

channel

(0-9)

power

BLX4

channel

group

-10 dB

group

(A-Y)

channel

(0-9)

©2012 Shure Incorporated

27A16035 (Rev. 2)

BLX Wireless System

Table of Contents

Other manuals for Shure BLX1

User Guide25 pages

Questions and Answers:

L
Lisa SmithJul 27, 2025
What to do if Shure BLX1 has audio artifacts or dropouts?
- J
  Johnathan AdamsJul 27, 2025
  To address audio artifacts or dropouts in your Shure Microphone system, try the following: * Change the receiver and transmitter to a different group or channel. * Identify and remove any nearby sources of RF interference. * Replace the transmitter batteries. * Make sure the receiver and transmitter are correctly positioned within the system's specified parameters. * Ensure the system is set up within the recommended range and keep the receiver away from metallic surfaces. * For optimal sound, the transmitter should be used in line of sight from the receiver.
R
Randy BakerAug 2, 2025
How to troubleshoot Shure Microphone system with no sound or faint sound?
- R
  Rhonda HarrisAug 2, 2025
  If your Shure Microphone system has no sound or faint sound, check these potential solutions: 1. Verify all sound system connections and adjust the gain as needed. 2. Ensure the receiver is properly connected to the mixer or amplifier. 3. Turn on the transmitter and make sure the batteries are installed correctly. 4. Perform the transmitter setup. 5. Insert fresh batteries into the transmitter. 6. Ensure the DC adapter is securely plugged into the electrical outlet and that the receiver is powered on.
E
Elizabeth PeckAug 8, 2025
Why is the transmitter indicator LED flashing red on my Shure Microphone system?
- A
  Ashley JonesAug 8, 2025
  If the transmitter indicator LED on your Shure Microphone system is flashing red, replace the transmitter batteries.
A
Ashley WhiteAug 14, 2025
How to fix distortion on Shure Microphone system?
- M
  Michael ChaneyAug 15, 2025
  If you are experiencing distortion with your Shure Microphone system, reduce the transmitter gain.
J
jasonjohnsonAug 20, 2025
What to do if Shure Microphone system has sound level variations?
- J
  jgriffinAug 20, 2025
  If you notice sound level variations when switching to different sources on your Shure Microphone system, adjust the transmitter gain as necessary.

Shure BLX1 Specifications

General

RF power	10 mW
Form factor	Bodypack transmitter
Product color	Black
Built-in display	No
Housing material	Plastic
Maximum outdoor range	91 m
Operating frequency type	Ultra High Frequency (UHF)
Radio Frequency (RF) range	662 - 686 MHz
Operating temperature (T-T)	-18 - 57 °C
Microphone frequency response	50 - 15000 Hz
Total Harmonic Distortion (THD)	0.5 %
Battery type	AA
Battery voltage	1.5 V
Battery life (max)	14 h
Number of batteries supported	2

Weight and Dimensions

Depth	21 mm
Width	64 mm
Height	110 mm
Weight	75 g

Related product manuals

Preview: Shure BLX

Preview: Shure BLX88

Preview: Shure BLX4R

Preview: Shure BLX Series

Shure BLX Series

Shure BLX14E T11

Preview: Shure BLX4RE-H8E

Shure BLX4RE-H8E

Preview: Shure BLX288/B58

Shure BLX288/B58

Preview: Shure BLX24E/PG58

Shure BLX24E/PG58

Shure BLX1288/P31-H9