ENGLISH
26
Activating the Frequency Lock Function
The Frequency Lock function prevents accidental frequency changes, and is par-
ticularly useful in preventing accidental or unauthorized changes. The lock function
is retained in memory, even if the transmitter is turned off and the batteries removed.
To activate the Frequency Lock function, proceed as follows:
1. Turn the transmitter power off.
2. Turn the power back on while holding down the SET button until the fuel gauge
on the transmitter is active. “Fr L” appears momentarily, as shown in Figure 44,
until you release the SET button.
FIGURE 44
3. To verify that the frequency lock function is turned on, press the MODE or SET
button. If the lock function is turned on, “– –” appears on the transmitter screen,
as shown in Figure 45.
FIGURE 45
To Next Page
Loading...
