Shuttle XPC - Page 22

16
English
IDE HDD Block Mode
If your IDE hard drive supports block mode select Enabled for auto-
matic detection of the optimal number of block read/writes per sector
the drive can support.
Ø The Choice: Enabled or Disabled.
SIS OnChip PCI Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
SIS USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals.
Ø The choice: Enabled or Disabled.
USB 2.0 Supports
This item is used to defined USB Keyboard id Enabled or Disabled.
Ø The Choice: Enabled or Disabled.
USB Mouse Support
This item is used to defined USB Mouse id Enabled or Disabled.
Ø The Choice: Enabled or Disabled.
Audio Controller
This item allows you to control the onboard Audio.
Ø The Choice: Enabled or Disabled.
SIS Ethernet Controller
This item allows you to enable/disable the SIS Ethernet Controller.
Ø The Choice: Enabled or Disabled.
SiS Serial ATA Controller
Use these item to enable or disable the SiS Serial ATA Controller.
Ø The Choice: Enabled or Disabled.
SiS Serial ATA Mode
This item allows you to set the SATA Mode.
Ø The Choice: IDE Mode, AHCI Mode or RAID Mode.
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip.
Ø The choice: Enabled or Disabled.