Shuttle XPC - Page 26

20
English
PM Wake Up Events
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
IRQ [3-7, 9-15], NMI
When enabled, any event occurring at IRQs 3 through 15 (excluding
IRQ 8) will awaken a system, which has been powered down.
Ø The choice: Enabled, Disabled.
IRQ 8 Break Suspend
This field allows you to enable or disable monitoring of IRQ8 so that it
does not awaken the system from a suspend mode.
Ø The choice: Enabled, Disabled.
RING Power Up Control
When set to Enabled, the system power will be turned on if there is any
modem activity.
Ø The choice: Enabled, Disabled.
MACPME Power Up Control
This item allows you to enable/disable the MACPME Power Up Control.
Ø The Choice: Enabled or Disabled.
MAC Remote WakeUp Control
This item allows you to enable/disable the MAC Remote WakeUp Control.
Ø The Choice: Enabled or Disabled.
PCIPME Power Up Control
When set to Enabled, system power will be turned on if there is any
PCI card activity from PCI cards that trigger a PME event, such as
LAN or Modem cards.
Ø The choice: Enabled, Disabled.
PS2KB Power Up Control
This item selects the PS2KB Power Up Control.
Only supports S4/S5 Hotkey: Ctrl+Alt+Backspace
Ø The choice: Hot key, Any key.
PS2MS Power Up Control
This item selects the PS2MS Power Up Control.
Ø The choice: Disabled, Click, Move & Click.