SICK deTec4 Core Vibes - Mounting the Quickfix Bracket to a Profile; Lateral and Rear Mounting with the Quickfix Bracket

Mount QuickFix bracket on a machine or profile frame
T
able 3: Lateral and rear mounting with the QuickFix bracket
Mounting type Description
On the side Fasten the M5 screw to the machine or profile frame through the QuickFix
br
acket. A screw nut or threaded hole is required on the machine or profile
frame (!).
Fasten the M5 screw to the QuickFix bracket through the machine or profile
fr
ame. A screw nut is required for each QuickFix bracket (").
Fasten the M5 screw to the profile frame through the QuickFix bracket. A
slidin
g nut is required on the profile frame (§).
On the back Fasten the M5 screw to the machine or profile frame through the QuickFix
br
acket. A screw nut or threaded hole is required on the machine or profile
frame ($).
!
§
$
"
a
b
a
b
Figure 23: Mounting the QuickFix bracket to a profile
1
Mounting on the side
2
Mounting on the side
3
Mounting on the side
4
Mounting on the back
5 MOUNTING
38
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Vibes 8024467/2019-06-18 | SICK
Subject to change without notice