17 List of tables
1. Formula for calculating the minimum distance from reflective surfaces............... 21
2. Formula for calculating the minimum distance from reflective surfaces............... 21
3. Lateral and rear mounting with the QuickFix bracket.............................................. 38
4. System connection pin assignment (male connector, M12, 5-pin).........................41
5. Indication of the alignment quality............................................................................46
6. Fault indicator on the sender.....................................................................................51
7. Fault indicator on the receiver................................................................................... 51
8. General system data.................................................................................................. 54
9. Technical data for sender...........................................................................................55
10. Technical specifications, receiver.............................................................................. 55
11. Operating data............................................................................................................ 55
12. Response time dependent on the protective field height........................................56
13. Power consumption, sender and receiver.................................................................56
14. Maximum lengths of cable for wire cross-section 0.34 mm
2
, c
opper wire............ 57
15. Weight of sender and receiver ..................................................................................57
16. Dimensions based on the protective field height, sender and receiver..................58
17. Ordering information deTec4 Core Vibes for 30 mm resolution..............................60
18. Ordering information deTec4 Core Vibes for 30 mm resolution..............................60
19. Ordering information deTec4 Core Vibes for 30 mm resolution..............................61
20. Brackets ordering information................................................................................... 62
21. Mounting accessories ordering information............................................................. 62
22. Ordering information for M12 connecting cable, 5-pin (0.34 mm
2
) ...................... 62
23. Ordering information, connection cable (replacement of existing devices) .......... 63
24. Distributor ordering information................................................................................ 63
25. Resistance terminal ordering information................................................................ 63
26. Ordering information for power supply......................................................................63
27. Alignment aid ordering information...........................................................................63
28. Cleaning agent ordering information.........................................................................64
29. Ordering information, test rods..................................................................................64
30. Note on specified standards......................................................................................66
LIST OF TABLES 17
8024467/2019-06-18 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Vibes
69
Subject to change without notice
To Next Page
Loading...
