SICK deTec4 Core Vibes - Check During Commissioning and Modifications; Indication of the Alignment Quality

Indication of the alignment quality
T
able 5: Indication of the alignment quality
LEDs Meaning
Alignment quality light emitting
diode
s
OSSD
1 2 3 4
o o o o O R
ed
Alignment is insufficient or the protective
f
ield is interrupted at least partially. The
receiver cannot synchronize with the
sender.
O Blue o o o O R
ed
Alignment is insufficient or the protective
f
ield is interrupted at least partially.
O Blue O Blue o o O R
ed
Alignment is insufficient or the protective
f
ield is interrupted at least partially.
O Blue O Blue o o O Gr
een
Alignment is not yet sufficient for stable
a
vailability.
O Blue O Blue O Blue o O Gr
een
Alignment is good, stable availability.
1)
O Blue O Blue O Blue O Blue O Gr
een
Alignment is very good.
o LED of
f. Ö LED flashes. O LED illuminates.
1)
If the protective fields are very wide, there is a possibility that all four alignment quality LEDs will not light
up even when alignment is good.
7.5 Check during commissioning and modifications
The check must detect if it is possible to enter the hazardous area without being
de
tected.
b
C
arry out the checks according to the instructions from the manufacturer of the
machine and from the operating entity.
7 C
OMMISSIONING
46
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Vibes 8024467/2019-06-18 | SICK
Subject to change without notice