SICK ICD890 - Page 25

Pin Signal Function
4 N.c. –
5 RD+/TD+ (RS-485) Sender+/receiver+
6 RD–/TD– (RS-485) Sender–/receiver–
7 GND Ground
8 N.c. –
“LIGHT 2” connection (depends on variant)
1
7
2
6
3
4
5
8
Figure 12: Female connector, M12, 8-pin, A-coded
NOTE
Device with variant A connection mask: available, no function.
Device with variant B connection mask: not available.
Table 8: Pin assignment of the “LIGHT 2” connection
Pin Signal Function
1 N.c. –
2 LAMP_ON+ (Q2) Trigger signal for illumination unit 2
3 N.c. –
4 N.c. –
5 RD+/TD+ (RS-485) Sender+/receiver+
6 RD–/TD– (RS-485) Sender–/receiver–
7 GND Ground
8 N.c. –
"I/O" connection (depends on variant)
3
1
7
2
6
5
4
8
9
10
12
11
NOTE
Device with variant A connection mask: not available.
Device with variant B connection mask: available.
Table 9: Pin assignment of the “I/O” connection
Pin Signal Function
1 V
S
Supply voltage (24 V)
1)
2 GND Ground
3 Trigger IN ISO Trigger, digital input (24 V), galvanically isolated
4 GND IN ISO Ground, digital input (24 V), galvanically isolated
5 INC B Encoder, digital input (24 V), galvanically isolated
ELECTRICAL INSTALLATION 6
8023775/18IM/2020-07-02 | SICK T E C H N I C A L I N F O R M A T I O N | Camera ICD890 Generation 4
25
Subject to change without notice