SICK IDM120 Series

Programming Procedures
Operating Instructions
IDM corded & IDM Bluetooth
30
© SICK AG · Germany · All rights reserved · Subject to change without notice
8017159/2014-04-24
3.2.6 Dual Level Scan
Scan one of family
codes
Scan
„PROGRAM“
(1
st
) Scan several
option codes
Repeat
selection
Scan
„END“
Yes
No
Enter Programming mode.
Select the desired programming
family.
Select several option codes for the
desired parameters.
1. Select one or several option
codes for the desired
parameters.
2. If it’s necessary scan “FIN” to
terminate the option code
selection.
Do you want to select another
programming family?
Exit programming mode.
(2
nd
) Scan one or
several option codes