SICK IDM120 Series

Operating Instructions
Operation Control
IDM corded
& IDM Bluetooth
8017159/2014-04-24
© SICK AG · Germany · All rights reserved · Subject to change without notice
83
3.9.9 Center Alignment, Unique Barcode Reporting
PROGRAM
F_DEFAULT
Option Code
Family Code
Selection
P.C. Parameter Selection
1D Corded
(IDM1x0)
2D Corded
(IDM2x0)
1D BT
(IDM1x1)
2D BT
(IDM2x1)
Center Alignment
SS Disable in Hand-Held mode  - 0 - 0
SS Enable in Hand-Held mode - 1 - 1
SS Disable in Hands-Free mode  - 2 - 2
SS Enable in Hands-Free mode - 3 - 3
Unique Barcode
Reporting
SS Disable  - 0 - 0
SS Enable - 1 - 1
Center Alignment
When this function is enabled, the scanner only decodes barcode(s) around the aiming line.
Unique Bar Code Reporting
When this function is enabled, the scanner only outputs unique barcodes when the trigger is pressed. This
function is workable when Multiple Read mode is selected.
Hand-Held mode: Low power mode, Trigger mode, Alternative mode, Toggle mode, Level mode, Multiple read
mode
Hands-Free mode: Presentation mode, Force mode, Diagnostic mode