SICK InspectorP - Page 13

PRODUCT DESCRIPTION 3
8024534 / 16UW / 2020-02-26 Operating Instructions | InspectorP Rack Fine Positioning 13
Subject to change without notice
Applications with reflectors
Round reflectors as positioning marks can only be used for single deep applications.
The surface characteristics of the steel around the reflector will have only a minor
effect on the application and can be ignored.
NOTE
The following reflectors are recommended:
•
PL22-1 (part number: 1003546)
•
PL22-2 (part number: 1003621)
•
PL22-3 (part number: 1004488)
•
PL22-4 (part number: 5327829)
You can find the reflectors as accessories in the Internet at www.sick.com by
entering the respective part number into the search field.