SICK S3000 Cold Store

Chapter 5 Addendum Operating Instructions
S3000 Cold Store
8 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8012029/YY95/2016-02-05
Subject to change without notice
Electrical installation
5 Electrical installation
Switch the power supply off!
The machine/system could inadvertently start up while you are connecting the devices.
 Ensure that the entire machine/system is disconnected during the electrical
installation.
5.1 System connection
The inputs and outputs for the S3000 Cold Store are on the 16-pin connection plug (screw-
type terminals). Feed the connection cables through one of the three cable glands into the
plug housing.

WARNING
Fig.
3
:
Connection plug
Cable glands
Cable gland