NOTICE
Risk of damage/malfunction due to incorrect PIN assignment
Incorrect wiring of the male connectors/female connectors can lead to damage to or
malfunctions in the system.
■
Observe data sheets provided by the cable manufacturer.
■
Observe the pin assignment.
NOTICE
Risk of damage to peripheral devices!
If peripheral devices are connected when the voltage supply is also applied, these
devices can become damaged.
■
Only connect peripheral devices when the voltage supply is disconnected.
1. Ensure that the voltage has been disconnected by the user.
2. Connect voltage supply cable(s) to the device.
3. Lay the cable(s) with strain relief.
4. Have the user connect the voltage supply.
5. Have the user activate the voltage.
ELECTRICAL INSTALLATION 6
8028935//2023-09-26 | SICK O P E R A T I N G I N S T R U C T I O N S | SIM800
19
Subject to change without notice
To Next Page
Loading...
Need help?
General
