•
In the vicinity of magnetic fields
•
Ferromagnetic background
Among others, the safety locking device is only suitable for the following applications
with restrictions:
•
In the vicinity of flying metal particles (see "Mounting near metal particles",
page 15).
2.4 Requirements for the qualification of personnel
The safety locking device must be planned in, installed, connected, commissioned, and
serviced only by qualified safety personnel.
Project planning
You need safety expertise to implement safety functions and select suitable products
for that purpose. You need expert knowledge of the applicable standards and regula‐
tions.
Mounting, electrical installation and commissioning
You need suitable expertise and experience. You must be able to assess if the machine
is operating safely.
Operation and maintenance
You need suitable expertise and experience. You must be instructed in machine oper‐
ation by the machine operator. For maintenance, you must be able to assess if the
machine is operating safely.
2 SAFETY INFORMATION
8
O P E R A T I N G I N S T R U C T I O N S | TR10 Lock 8019972/1CS1/2022-07-20 | SICK
Subject to change without notice
To Next Page
Loading...