SICK TR110 Lock

5
4
3
2
1
Figure 34: Internal circuitry: end connector for safe series connection
The 5-pin male connector of the last T-connector upstream of the safe evaluation unit is
the interface between the safe series connection and the safe evaluation unit.
12
3 4
5
Figure 35: Connection of the safe series connection (M12, 5-pin, A-coded, male connector)
Table 13: Pin assignment connection of the safe series connector (male connector, M12, 5-pin,
A-coded)
Pin Wire color
1)
Designation Description
1 Brown +24 V DC Voltage supply 24 V DC
2 White OSSD 1 OSSD 1 output
3 Blue 0 V Voltage supply 0 V DC
4 Black OSSD 2 OSSD 2 output
5 Gray RST Hardware reset connection
1)
Applies to the extension cables recommended as accessories.
2)
All switches of a chain can be reset simultaneously with the RST input (reset input). For this, a voltage of
24 V must applied to the RST input for at least 3 s.
If the RST input is not used, it must be connected to 0 V.
Further topics
•
"Accessories", page 63
6 ELECTRICAL INSTALLATION
34
O P E R A T I N G I N S T R U C T I O N S | TR110 Lock 8023119/15LY/2019-10-28 | SICK
Subject to change without notice