SICK TR110 Lock

1 About this document
1.1 Scope
These operating instructions are valid for the TR110 Lock safety locking device.
This document is included with the following SICK part numbers (this document in all
available language versions):
8023116
1.2 Target groups of these operating instructions
Some chapters of these operating instructions are intended for certain target groups.
However, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected chapters of these operating instructions
Target group Chapter of these operating instructions
Project developers (planners, developers,
designers)
"Project planning", page 15
"Technical data", page 45
Installers "Mounting", page 24
Electricians "Electrical installation", page 29
Safety experts (such as CE authorized repre‐
sentatives, compliance officers, people who
test and approve the application)
"Project planning", page 15
"Commissioning", page 35
"Technical data", page 45
Operators "Troubleshooting", page 42
Maintenance personnel "Troubleshooting", page 42
1.3 Additional information
www.sick.com
The following information is available on the Internet:
•
This document in other languages
•
Data sheets and application examples
•
CAD data and dimensional drawings
•
Certificates (e.g. EU declaration of conformity)
•
Guide for Safe Machinery Six steps to a safe machine
1.4
Symbols and document conventions
The following symbols and conventions are used in this document:
Safety notes and other notes
DANGER
Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.
WARNING
Indicates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.
ABOUT THIS DOCUMENT 1
8023119/15LY/2019-10-28 | SICK O P E R A T I N G I N S T R U C T I O N S | TR110 Lock
5
Subject to change without notice