Need help?Do you have a question about the SICK V2D621P-2MDFGB5 and is the answer not in the manual?
General| Enclosure rating | IP67 |
|---|---|
| Housing Material | Aluminum |
| Working distance | 2000 mm |
| Interfaces | Ethernet |
| Operating temperature | 0°C to 50°C |
| Storage temperature | -20°C to 70°C |
| Output | Ethernet |
| Power Supply | 24 V DC |
Defines the device's specific purpose for industrial tasks requiring high-resolution imaging.
Outlines prohibited uses and conditions that constitute incorrect operation of the device.
Warns about dangers associated with unauthorized modifications to the device.
Specifies qualifications needed for safe operation and maintenance of the device.
Details specific hazards like optical radiation and electrical safety precautions.
Explains device identification using the type label and type code.
Outlines the general characteristics and features of the device.
Introduces the SICK AppSpace ecosystem for device programming and management.
Lists essential considerations for mounting the device, including technical data and environment.
Covers installation requirements, space needs, and auxiliary equipment for mounting.
Details environmental considerations, heat dissipation, and mounting methods for the device.
Provides steps for physically mounting the device using screws or SICK mounting systems.
Highlights critical safety notices regarding voltage sources and working with live parts.
Covers voltage source requirements, protection class, and wiring precautions.
Details risks from electrical currents and grounding, and necessary safety measures.
Provides information on pre-assembled cables and general wiring practices.
Shows connection principles for operation mode and various interfaces.
Illustrates the overall connection scheme for the device in operation mode.
Details pin assignments for the "Power/Serial data/CAN/I/O" and "Ethernet" connections.
Details requirements for the power source and how to connect the supply voltage.
Explains how to wire Ethernet and serial data interfaces, including cable length recommendations.
Introduces SICK AppManager and SICK AppStudio for device configuration and programming.
Outlines requirements for establishing network communication between the PC and the device.
Describes the pre-installed Quality Inspection SensorApp and how to access its interface.
Covers starting SICK AppStudio, Lua scripting, and accessing the Programming API.
Advises on contacting SICK Service for unresolved faults and provides contact guidance.
States that repairs must be performed by authorized SICK personnel only.
To Next Page
