AC MUM0096 rev. 07 - 8 -
MR21
EXCLUSION OF POWER SOURCES
Before carrying out any cleaning, lubricaon and/or maintenance
work, maintenance personnel must put the winch out of service
by disconnecng the power supply and must wait for the heated
parts of the motor and the winch to reach ambient temperature.
WARNING
Do not lean and/or sit on the winch, either when it is in or out of
service.
WARNING
Do not approach or lean against the rotang parts (ywheel
or pulley painted yellow).
Do not deposit or place any objects or containers of
liquids etc. on the winch and especially on electrical parts.