sidhil Solite UK - Symbol Definition

10
6. SYMBOL DEFINITION
The following symbols are found on this bed:
Warning
Beware of potential hazard
Refertoinstructionsforuse-Recommended
Failure to read the instructions for use could introduce a hazard
Place of manufacture
W.E.E.ELabel-Foundonindividualpartsofelectricalsystem
(Waste Electrical and Electronic Equipment) Refer to section 15
Safe working load
Refer to section 4.3
Class II electrical device
The user / occupant is protected by at least two layers of insulation between the current
carryingparts(e.g.controlboxandmainscable)andthemetalaccessibleparts–Ifdamage
is noticed to any electrical component, turn off at the mains and contact your provider or
Sidhil Ltd. immediately.
Mattress suitability
Refer to section 17
Type B Applied Part
Applied Part: The parts of the bed that come into physical contact with the user / occupant
in order for the bed to carry out its intended function (refer to section 16.2 for a list of
applied parts).
Type B: Applied parts complying with specific requirements for protection against electric
shock(IEC60601-1:2005)andthatcanbeimmediatelyreleasedfromthepatient.
Detachable side rail suitability
Use of an incorrectly specified side rail could introduce a hazard
Refertoinstructionsforuse-Mandatory
Failure to read the instructions for use could introduce a hazard
Maximum patient weight
Refer to section 4.3