Siemens 181

Technical specifications
6.1 Technical specifications
Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
44 Manual, 02/2014, A5E03573289-AD
6ES7134-6JD00-0CA1
Operational limit in entire temperature range
Voltage in relation to input range, (+/-)
± 0.1%
Resistance in relation to input range, (+/-)
± 0.1%
Basic error limit (operational limit at 25 °C)
Voltage in relation to input range, (+/-)
± 0.05%
Resistance in relation to input range, (+/-)
± 0.05%
Interference voltage suppression for f = n x (f1 +/-1%),
f1 = interference frequency
Series
-mode interference (peak of the interference < rated
value of the input range), min.
70 dB
Common mode voltage, max.
10 V
Common mode interference, min.
90 dB
Interrupts/diagnostics/status information
Interrupts
Diagnostic error interrupt
Yes
Limit interrupt
Yes; two high limits and two low
limits each
Diagnostics alarms
Diagnostics
Yes
Monitoring of supply voltage
Yes
Wire break
Yes; channel-based
Overflow/underflow
Yes; channel-based
Diagnostics indicator LED
Monitoring of supply voltage
Yes; green PWR LED
Channel status display
Yes; green LED
For channel diagnostics
Yes; red LED
For module diagnostics
Yes; green/red DIAG LED
Electrical isolation
Electrical isolation channels
Between the channels
No
Between the channels and the backplane bus
Yes
Between the channels and the supply voltage of the electronics
Yes
Permitted potential difference
Between different circuits
75 VDC / 60 VAC (basic insulation)
Between the inputs (UCM)
10 VDC
Insulation
Insulation tested with
707 VDC (type test)
Dimensions
Width
15 mm
Weights
Weight, approx.
30 g