Siemens 6ES7131-6BF00-0DA0 - 2 Product Overview; Properties

Product overview
2.1 Properties
Digital input module DI 8x24VDC HS (6ES7131‑6BF00‑0DA0)
12 Manual, 03/2015, A5E35243810-AA
The module can be configured with HSP or a GSD file. The configurations for the operating
modes can be found under various codes / module names:
Table 2- 2 Codes / module names for the configuration options
Operating mode
Configuration software
HSP0127 for STEP 7
(TIA Portal)
HSP0229 for STEP 7
GSD file
PROFINET IO
GSD file
PROFIBUS DP
DI Without
QI
DI 8×24VDC HS DI 8×24VDC HS
DI/OVS
DI 8×24VDC HS DI 8×24VDC HS
With QI
DI 8×24VDC HS QI
—
Counting (CNT)
DI 8×24VDC HS CNT
DI 8×24VDC HS CNT
DI 8×24VDC HS CNT
Oversampling
(OVS) *
DI 8×24VDC HS
DI/OVS
— —
*
The interface module or CPU with which the module is used must support isochronous mode.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You can find additional information on the accessories in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/en/58649293) system manual.