Counting operating mode (CNT)
4.2 Parameters/address space
Digital input module DI 8x24VDC HS (6ES7131‑6BF00‑0DA0)
32 Manual, 03/2015, A5E35243810-AA
You define two comparison values that can control the STS_DQ feedback bit, independent of
the user program. If the current counter value meets the configured comparison condition,
the STS_DQ reset bit is set. You can use the STS_DQ reset bit in order to control a digital
output module's digital output.
The comparison values are configurable and can be modified during runtime with the user
program. When a comparison event occurs, in each case an event bit is set in the feedback
interface (Page 41).
To Next Page
Loading...
