Oversampling (OVS) operating mode
5.2 Parameters/address space
Digital input module DI 8x24VDC HS (6ES7131‑6BF00‑0DA0)
Manual, 03/2015, A5E35243810-AA
57
Address space
Address space
The figure below shows the assignment of the address space. "IB x" represents the start
address of input byte x.
In the respective bit, the subcycles are counted from left to right. Up to 32 subcycles are
possible. If fewer than 32 subcycles are configured, the bits that are consequently unused
are set to 0.
Figure 5-5 Address space for oversampling
Note
While you are changing parameters in RUN mode, corruption of input data can occur.
To Next Page
Loading...
