Counting operating mode (CNT)
4.2 Parameters/address space
Digital input module DI 8x24VDC HS (6ES7131‑6BF00‑0DA0)
Manual, 03/2015, A5E35243810-AA
39
Assignment of the control interface
Control interface
The user program uses the control interface to influence the behavior of the module's
counter. The figure below shows the address space allocation for the control interface in the
process image of the outputs.
"QB x" represents the start address of output byte x.
Figure 4-3 Assignment of the control interface
To Next Page
Loading...
