Siemens 6ES7131-6BF00-0DA0 - Page 64

Technical specifications
6.1 Technical specifications
Digital input module DI 8x24VDC HS (6ES7131‑6BF00‑0DA0)
64 Manual, 03/2015, A5E35243810-AA
6ES7131-6BF00-0DA0
Input delay (for rated value of input voltage)
For standard inputs
•
Configurable
Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 /
20 ms
For interrupt inputs
•
Configurable
Yes
For counters/technological functions
•
Configurable
Yes
Cable length
shielded, max.
50 m
unshielded, max.
50 m
Encoders
Supported encoders
2-wire sensor
Yes
•
Permissible quiescent current (2-wire sensor),
max.
1.5 mA
Isochronous mode
Isochronous mode (application synchronized until
terminal)
Yes
Bus cycle time (TDP), min.
250 µs
Jitter, max.
5 µs
Interrupts/diagnostics/status information
Interrupts
Diagnostic interrupt
Yes
Hardware interrupt
Yes
Diagnostics alarms
Diagnostic information can be read
Yes
Diagnostics
Yes
Monitoring of supply voltage
Yes
Short-circuit
Yes
Diagnostics display LED
Monitoring of the supply voltage (PWR LED)
Yes; green PWR LED
Channel status display
Yes; green LED
For channel diagnostics
No
For module diagnostics
Yes; green/red DIAG LED
Parameters
Monitoring of supply voltage
Yes
Electrical isolation
Electrical isolation of channels
Between the channels
No
Between the channels and the backplane bus
Yes