Technical references
A.3 SITRANS LC300 Pressure versus temperature curves
SITRANS LC300
52 Operating Instructions, 05/2021, A5E47904073-AA
A.3.2 LC300 Standard, extended rod, and cable versions, ASME flanged
• The user is responsible for the selection of bolting and gasket materials which will fall
within the limits of the flange and its intended use, and which are suitable for the service
conditions.
P = Permitted Operating Pressure
1)
1)
1)
T = Permitted Operating Temperature
1)
The curve denotes the minimum allowable flange class for the shaded area below.