500-8067.9 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * Revision 03 101
Operation
Operation
DANGER!
The internal arc classification of the switchgear according to IEC 62271-200 has only
been proved by tests for the switchgear sides with internal arc classification and with
closed high-voltage compartments.
Ö Determine the IAC classification of the switchgear by means of the data on
the rating plate (see Page 59, "Rating plates").
Ö Regulations for access to switchgear areas without internal arc classification
according to IEC 62271-200 must be defined by the entrepreneur or
the switchgear owner.
To Next Page
Loading...
