Description
8 Revision 03 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * 500-8067.9
Description
5 Features
Typical uses 8DJH switchgear is used - even under severe ambient conditions - for power distribution
in secondary distribution systems, such as
• Industrial distribution systems
• Consumer and transfer substations
It is available for rated voltages up to 24 kV and rated currents of the feeders up
to 630 A.
Technology • Factory-assembled, type-tested, metal-enclosed switchgear for indoor installation
• Individual panels and/or panel blocks can be freely combined to a switchgear assembly
• Circuit-breaker panels with maintenance-free indoor vacuum circuit-breakers for rated
voltages from 7.2 to 24 kV
• Hermetically welded switchgear vessel, made of stainless steel, with welded-in
bushings for electrical connections and mechanical components
• Insulating gas SF
6
• Maintenance-free
• Climate-independent
• Three-position switch-disconnector with load-break and make-proof earthing function
• Circuit-breaker with vacuum interrupters and integrated three-position disconnector
with make-proof earthing function
• Cable connection for bushings with outside cone
• Installation and extension without gas work
• Comprehensive special equipment or accessories
• Ecological manufacture and recycling
To Next Page
Loading...
Need help?
General
