500-8067.9 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * Revision 03 49
Description
Switchgear weights The weight of the switchgear unit results from the sum of the weights per functional
unit. Depending on the design and the degree to which it is equipped (e.g. current
transformers, motor operating mechanism, low-voltage compartment), different values
will result. The table shows mean values.
Panel type Width [mm] Gross weight for a switchgear height of
1200 mm 1400 mm 1700 mm
approx. [kg] approx. [kg] approx. [kg]
R 310 100 110 120
R(500) 500 140 150 170
K 310 100 110 120
K(E) 430 130 140 160
T 430 135 145 160
L 430 130 140 155
L (type 1.1) without 4MT3 500 210 220 240
L (type 2) 500 160 170 190
Panel block Width [mm] Gross weight for a switchgear height (without low-voltage
compartment) of
1200 mm 1400 mm 1700 mm
approx. [kg] approx. [kg] approx. [kg]
KT,TK 740 230 250 280
K(E)T 860 240 260 290
KL*,LK 740 230 250 280
K(E)L* 860 250 270 300
RK, KR 620 200 220 240
RT, TR 740 230 250 280
RL*, LR 740 230 250 280
TT 860 270 290 320
RR 620 200 220 240
LL* 860 260 280 310
RRT 1050 330 360 400
RRL* 1050 320 350 390
RTR 1050 330 360 400
RLR 1050 320 350 390
RRR 930 300 330 360
TTT 1290 410 440 490
LLL* 1290 400 430 480
RRRT 1360 430 470 520
RRRL* 1360 430 470 520
RRRR 1240 400 440 480
TRRT 1480 470 510 560
LRRL 1480 460 500 550
TTTT 1720 540 580 640
LLLL* 1720 520 560 620
* Applies to design with circuit-breaker type 2
To Next Page
Loading...
