6 / 50
Siemens Actuators SAS.., SAT.. for valves CE1P4041en
Building Technologies About this documentation 2015-05-19
1.4.3 Quality assurance
These documents were prepared with great care.
· The contents of all documents are checked at regular intervals
· All necessary corrections are included in subsequent versions
· Anpassungen bzw. Documents are automatically amended as a consequence of
modifications and corrections to the products described
Please make sure that you are aware of the latest document revision date.
If you find lack of clarity while using this document, or if you have any criticisms or
suggestions, please contact the product manager in your nearest branch office.
The addresses of the Siemens regional companies are available at
www.siemens.com/acvatix
.
1.4.4 Document use / request to the reader
Before using our products, it is important that you read the documents supplied
with or ordered at the same time as the products (equipment, applications, tools
etc.) carefully and in full.
We assume that persons using our products and documents are authorized and
trained appropriately and have the technical knowledge required to use our
products as intended.
More information on the products and applications is available:
· On the intranet (Siemens employees only) at
https://workspace.sbt.siemens.com/content/00001123/default.aspx.
· From the Siemens branch office near you www.siemens.com/acvatix or from
your system supplier.
· From the support team at headquarters fieldsupport-zug.ch.sbt@siemens.com
if
there is no local point of contact.
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the improper
compliance of the same.
1.5 Scope of this documentation
This document shall serve as a source of knowledge. In addition to basic
information, it provides general technical information about the actuators used in
HVAC plants. It is also targeted at engineering staff, HVAC electrical planners,
system integrators and service engineers and provides all information required for
planning work, correct installation, commissioning and service.
To Next Page
Loading...
Need help?
General
