Siemens ARCADIS Varic Start-Up Instructions

Siemens AG SPR2-310.815.01.07.02 ARCADIS Varic
12.06 CS PS SP
General Start-up 25
Page 25 of 64
Medical Solutions
Function check of the emergency stop switches 2.1
• Connect the system to the voltage and boot it.
• Click "Emergency" for the patient registration.
• Operate the EMERGENCY STOP switch on the C-arm.
• The safety switch moves audibly and the following message appears on the lower left
monitor edge: "The emergency stop has been pressed"
• Disengage the EMERGENCY STOP switch.
• The safety switch moves audibly and the following message appears on the lower left
monitor edge: "The emergency stop switch has been released."
• Document the function of the EMERGENCY STOP switch in the "Test protocol, C-arm
movement and emergency stop.

Siemens ARCADIS Varic Specifications

General

Type	Mobile C-arm
Image Intensifier	9-inch or 12-inch
DICOM Compatibility	Yes
Frame Rate	Up to 30 fps
Focal Spot Size	0.3/0.6 mm
Monitor	Dual 18-inch TFT LCD monitors