3.2 Alarm list details
The alarm list contains the following information about the most recent alarm:
Line 1 + Alarm name Status
Line 2 Notification class (Notification group)
Line 3 Date Time of day
Example: +FrGuardTemp.htg: Alarm
0 Emerg(A)
15.10. 20 09 21:32
3.3 Alarm list
The following details about active alarms are included in the alarm list:
Line 1 The line displays how many alarms are still not acknowledged:
Acknowledged Passive number.
Example:
Acknowledged Passive 14
Press the knob on the HMI to acknowledge all unacknowledged
alarms.
Other lines + Alarm name Status
Example:
+ Extract air temp.: Alarm
– Press the navigation dial to display details about the alarm.
– Press the alarm button to display the list settings.
The list can include up to 50 entries.
3.4 Alarm history
The following details on active and passive alarms are included in the alarm list:
Line 1 The line displays how many alarms are still not reset:
Acknowledged Passive number
Example:
Acknowledged Passive 14
Press the knob on the HMI to acknowledge all unacknowledged
alarms.
Other lines + Alarm name: Status
Example:
+ Extract air temp.: Alarm (notified alarm).
- Extract air temp.: OK (deleted larm).
– Press the navigation dial to display details about the alarm.
– Press the alarm button to display the list settings.
The list can include up to 50 entries.
Note!
Note!
Short Manual for Climatix Control System [v. 2.14.10, 2.14.20, 2.14.30 & 2.14.40]
SMCX.130215.02GB Page 22
To Next Page
Loading...
