Siemens CPU 1512SP-1 PN User Manual

CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
28
Technical specifications
6
The following table shows the technical specifications as of 11/2022. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7512-1DM03-0AB0/td?dl=en).
Article number 6ES7512-1DM03-0AB0
General information 
Product type designation CPU 1512SP-1 PN
HW functional status FS01
Firmware version V3.0
Product function 
•
I&M data Yes; I&M0 to I&M3
•
Module swapping during operation (hot
swapping)
Yes; Multi-hot swapping
•
Isochronous mode Yes; only with PROFINET; with minimum OB 6x
cycle of 500 µs
Engineering with 
•
STEP 7 TIA Portal configurable/integrated
from version
V18 (FW V3.0); with older TIA Portal versions con
figurable as 6ES7512-1DK01-0AB0
Configuration control 
via dataset Yes
Control elements 
Mode selector switch 1
Supply voltage 
Rated value (DC) 24V
permissible range, lower limit (DC) 19.2V
permissible range, upper limit (DC) 28.8V
Reverse polarity protection Yes
Mains buffering 
•
Mains/voltage failure stored energy time 10ms
Input current 
Current consumption (rated value) 0.51A
Current consumption, max. 0.7A
Inrush current, max. 1.34A; Rated value
I²t 0.3A²·s
Power 
Infeed power to the backplane bus 8.05W
Power loss 
Power loss, typ. 6.5W
Memory 

Siemens CPU 1512SP-1 PN Specifications

General

Brand	Siemens
Model	CPU 1512SP-1 PN
Category	Industrial Equipment
Language	English