Siemens CU240E-2 - 2.9 Setpoint channel

Function diagrams
Setpoint channel
2-572
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
2.9 Setpoint channel
Function diagrams
3010 – Fixed speed setpoints, binary selection (p1016 = 2) 2-573
3011 – Fixed speed setpoints, direct selection (p1016 = 1) 2-574
3020 – Motorized potentiometer 2-575
3030 – Main/supplementary setpoint, setpoint scaling, jogging 2-576
3040 – Direction limitation and direction reversal 2-577
3050 – Skip frequency bands and frequency limitations 2-578
3060 – Basic ramp-function generator 2-579
3070 – Extended ramp-function generator 2-580
3080 – Ramp-function generator selection, status word, tracking 2-581