Configuration
9
Date / Time
56
Siemens AG A6V10334045
22.12.2011
9.7 Date / Time
z Display
Select “ON” to display the date/time on the screen. The position and color are
set via the camera's on-screen menu.
z Synchronization Mode
– Manual:
Enter the date and time.
– NTP: For details contact your system admin.
You can also enable Network Time Protocol (NTP) via the NTP server.
Enter a host name for the NTP server, select a time adjustment period, and
click “Save and Test” to start testing the NTP function.
– Synchronization from PC:
The system date/time can be synchronized via the PC settings.
z Daylight
Select "ON" to activate the daylight-saving function if you are in a daylight-
saving time zone (effective for NTP mode only).
To Next Page
Loading...
