Configuration
9
Firewall
58
Siemens AG A6V10334045
22.12.2011
z Advanced users can see the live picture and perform basic functions (e.g. PTZ
control, etc.).
z Users can only view the live image; they have no authorization to perform any
functions.
9.9 Firewall
9.9.1 IP Address filter
1. Enter the IP address(es) to be processed by the firewall system in the IP
address field(s). Up to 10 addresses can be set.
2. Enable the IP address(es) in the list which are to pass the firewall filter by
selecting "ON".
3. Select either "Allowed" or "Denied" or "OFF".
z Allowed: The listed IP addresses will pass the firewall.
z Denied: The listed IP addresses will be rejected by the firewall.
9.9.2 Forbidden ports
All the listed ports that enabled (set to "ON") will be rejected by the firewall.
To Next Page
Loading...
